South Downs Lines V1.02 Fix (Scenarios)

Description
The South Downs V1.0.2 Fix List

Note - I have also included the previous Loft Fix, if you haven\'t installed that you will need to install that first, if you have the V1.0.1 version of the route you only need this file, if you have the latest version of the route you will not need this Patch (V1.0.2)

* Fixed two broken Scenerios with AI Collisions
* Fixed spelling error in scenerio title
* Changed route to use Portsmouth Direct settings (i.e. Seasons, Sky, Weather, etc)
* Updated all scenarios to include the above
* Replaced Light on Folkestone West Building which was on during the day
* Added Lighting to Footbridge and outside Building at Bekesbourne station
* Added Lighting to Folkestone Central Entrance Area
* Fixed Broken 3rd Rail at Folkestone Central platform 1
* Fixed Unlevel platform Ends at Folkestone Central
* Minor Adjustments to signage at Aylesham Station (i moved it under the drainage pipe on the station building basically!), added benches and lighting under station building and broken loft.

Important Notes

* If you have a current version of the South Downs Lines you will either need to delete the scenarios folder (backing up anything that you have made first though) or delete all of the MD5 files in the scenario folder before you install this, you can find this folder under railworks/content/routes/
Other notes

* The high asset counts at Dover Central, Canterbury South and Canterbury Parkway as found are mainly due to the amount of platforms, 3rd rail and surpisingly the platform \"balls\" that are on the platforms! (these are also added to the asset count it seems so could account for a few hundred of the actual figure!).

* This will most likely be the last upload that i make mainly due to time and for other reasons - I have only uploaded this to fix any bugs that i have found (and have been told about), but if you see any bugs that are game breaking (i.e. causing something not to work please let me know, although if you see anything minor please let me know so that i can fix it for the next version if there is one of course)